Wednesday, November 26, 2014

Catching Up - Progress on the Interior

I must apologize for not having updated this blog in quite awhile.  Once again I've failed at retirement and the press of work has anchored me in San Francisco, far from our lovely MAYAN.  She remains at Wayne's boatyard in Wilmington with he and his crew hard at work on completing the tasks I left partially done, in addition to his many other jobs aboard.

While stuck in an office working, I've spend a little time working on the history of our lovely schooner and was thrilled when the grandson of her builder sent this along.  He has been researching his grandfather's dockyard in Belize and had the pen-n-ink done from a composite of family pictures.  A big THANK YOU to Robert Tewes for getting this lovely piece of art for all of us who love MAYAN and great old dockyards.

As I've mentioned earlier, part of the re-fit of MAYAN includes building a proper head with a shower, adding some berths forward, and rebuilding the starboard side of the saloon to make the seating more comfortable.  These projects are proceeding nicely.  I suppose some of the credit for the progress goes to me for not being there to constantly distract the team with silly questions. 



The new refrigeration, water tank and holding tank have been installed in the head, outboard and to port. (see above)  You can see that all of the wood that will be painted has been covered with red-lead paint prior to final finish.  This is the best technique we know of to stop dry rot and mildew. 

With that complete, Wayne has been able to start making real progress installing the bulkheads that he has built to enclose the space.  In this first picture the central athwartship bulkhead which divides the shower from the head forward of it is being installed.  (BTW, that's Wayne back there fitting the panel.)

The way that Wayne assembles the interior allows us to remove these bulkheads to access the equipment outboard of it and also allows us to remove them for re-finishing when required.  You can see that the central panels of the bulkhead have been sealed and have already received a couple of coats of varnish.  Prior to assembly, all the bulkheads, doors and panels will be completely finished with 8 coats of varnish.  Below is the same bulkhead viewed from the galley, aft of the head spaces. The shower will be on the left and the head is visible beyond the bulkhead.


Just forward of the head space, where the head used to be located, Wayne has built a berth and will build a storage space below it. While the camera has shortened the look of this berth, it is a full 6'6" long and full width.  These pieces have been dry-fit and will be removed for varnishing soon.  The sleeper's head will be aft, to the left in this picture and you can just see the opening at the foot of the berth to allow air-flow to the fo'c's'le in hot weather.


This next picture shows the opening from the passageway berth above into the fo'c's'le.  It will have a door for privacy.

While air flow is certainly valuable, one of our primary goals of MAYAN's mission is to be a great place for grandchildren.   The fo'c's'le will be their space and Stacey and I think it'll be great fun for them to be able to climb through the opening at the foot of the berth, and to have whomever is sleeping there get their toes tickled when they least expect it.  If you're crewing aboard MAYAN you'll need a sense of humor! ;)


Moving forward into the fo'c's'le in the picture above you can see a panel below the opening leading to the passageway berth.  This is part of the base of the two berths we're building up forward.  In the next picture you can see the same berth with the wide central area in the bow.  This platform provides a place to stand while moving sails up through the foredeck booby hatch, and will also make a great tiny person berth.  At the moment it's serving as sail storage.



Finally, Wayne has put together a wonderful video on how he built the raised panels for MAYAN.  Please enjoy it here: http://www.youtube.com/watch?v=LP-SfAV2yXg&feature=youtu.be

Monday, September 22, 2014

Building the Interior

With much of the mechanical, plumbing, and electrical nearing completion it's time to start building the bulkheads and lockers that will surround all that work.  All the wood has been planed and sanded to a uniform thickness.  Wayne has lofted the bulkheads in the shop, and has milled the rails and stiles.

The sheet of plywood on the right serves for the lofting and layout of multiple bulkheads.  The top, center, and bottom stiles for two narrow panels are laid atop the lofting for two narrow panels.


The end of each stile has a long tendon that will fit into the mortise in the rail.  In the picture on the left one can see the inner edges which will face the raised panel within the bulkhead.  Each has been milled on the shaper.  To produce all this Wayne has been running plank after plank through the shaper and then cutting out the tendons with a jig on the table saw.

I've no idea how he keeps it all straight, but there are dozens of small stacks of wood, each with the grain matched, piled around the shop and slowly forming themselves into raised panel bulkheads and doors.



Few boats have bulkheads built this way today, primarily because it's a massive amount of work and also because modern boats utilize the strength of the bulkheads as a key component of the boat's design.  In older boats, like MAYAN, the bulkheads often aren't structural and can be both less strong and moved to whatever place in the boat is most useful.  In the three pictures to the right, you can see how the tendon on the stile fits into the mortise in the rail to form the center structure of a bulkhead.  A panel will be inserted into the interior slots in the stile and rails.

A number of new bulkheads will be built to surround the new head, separate the head space from the forward passageway and from the galley, and to provide the cabinetry along the starboard side of the main saloon.  In addition, we will most likely replace a few of the older doors in spaces like the master stateroom and build new doors for the new head and shower that are all constructed with this raised panel technique.

Traditionally, only the stiles and rails were glued and fastened together.  The panels within the system were free to move within the slots.  This was done because the finishes were not particularly water-proof.  For example, oil based enamel and varnish only blocks 60% of moisture.  As the humidity changed, especially in northern Europe and New England, between summer and winter this allowed the large panels in the center of bulkheads and doors to expand and contract as they absorbed and lost water content.

However, many modern glues are capable of providing enough flex.  This will allow Wayne to glue in the panels, making everything much stronger and resistant to mold and rot that can occur when the panel is loose set.

Because the bulkheads and doors in the shower area will also be built in this way, and will be subjected to a great deal of moisture, we will be using epoxy to set all the joints.  After a few tests, we've decided to use varnish to finish the interior of the shower.

Panels made entirely of one broad plank are prone to cracking as the humidity changes.  As a result Wayne is gluing up the large panels from multiple smaller pieces with the grain matched.  This results in a stronger and more stable panel.

It has been a great deal of fun for me to hold the "dumb-end of the board" for Wayne in this process.  Learning a new field is always entertaining and in this case it's teaching me that I have a tremendous amount more to learn about the complexities of wood, adhesives, joints, shapes, and thousand of other things that Wayne has learned over his 40 years of ship and boat building.


Friday, September 12, 2014

What we did this week.....


MAYAN is a mess right now, with Ruben hard at work putting the port passageway berth in, Wayne building the head space, and me tearing out the stb side of the main saloon. After weeks and weeks of infrastructure stuff, like new exhaust systems, wiring, refrigeration, etc... none of which shows any progress to the uninitiated after the lockers are closed, it is wonderful to see the chips fly!!

Here is Ruben looking forward into the forepeak from the place where the passageway head used to be. Before "El Destructo" went after it (that's me) this is the place where MAYAN had her head. This opening will allow the foot well of the berth to protrude into the forepeak and reach the required 6'6" that our sons demand. There will be a hatch in the foot of the berth so that fresh air can flow through. (I hate quarter berths that don't have a vent in the foot well - too damn hot.) Also, as The Admiral pointed out, the munchkins who will inhabit the forepeak will have a lot of fun tickling the toes of the person sleeping in that berth and crawling through the foot well hatch!

Image

Below is the space where the head used to be. Originally, as seen in earlier pictures, I was going to refinish the long leaf yellow pine ceiling material as I did in the forepeak. But after taking some time away from the project I noticed that the wood had an odor (Damn leaking heads). I had attributed that to the plumbing for the head, but alas that wasn't the source. Various leaks over the years had saturated some of the wood with foul stuff (don't ask) and the smell was coming from the grain of the wood. Rather than strip and sand it all, which would have required at least a week, I tore it all out (took 5 hours). Rubin will install a Alaskan yellow cedar ceiling this coming week (in fact he's probably got it done by now). Smell gone and replaced by the nice fragrance of cedar. One third the work and a better result.

Image

Meanwhile, Wayne has been milling the wood with which to build the interior bits. Here's a stack of milled "rails" for the raised paneling and doors. Also a door jam and a few other bits in the making.

Image

Here's a pile of the "stiles" (the bits that go between the "rails". Together then surround the "panel" that will be machined to have that nice raised panel look. All the joints will be mortise and tendon, pinned with trunels.

Image

Meanwhile, back in the main saloon, El Destructo has been removing the stb settee and cupboards. In the picture below, the large space (6'6") on the right is where the berth used to be. We will move the berth forward and inboard, putting storage behind, so it can serve as a settee for the saloon. It'll be long enough to be a berth, keeping in mind Mr. Perry's missive to allow a space where women can curl their legs up and read. This should be about the best reading spot aboard when on port tack. Above the back rest for the settee will be raised panel doors and in the center of the row will be some leaded glass doors to break up the monotony of all the wood. Back aft we'll put in a small flat work space. It can serve as a chart table, for the rare occasion that we need to look at paper charts, but it's primary purpose will be as a stand up desk just below the main companionway. above and outboard of the work space will be doors that hide the RADAR and other instruments. (No electronics in view on MAYAN.) We've nixed the quarter berth under the chart table idea as we want the space for storage of wet sailing gear. There will be a powered fan in a vent, drain/pump and hot plumbing in there to get rid of water and dry things out quickly.

Image

In the forward section you'll notice that somewhere along the circuitous course MAYAN has sailed weights were added to her starboard side. Our guess is that these were added when the Yanmar generator engine was added to keep MAYAN on her lines. We're pondering removing these and adding some more battery capacity on the starboard side. No sense in hauling around lead unless it's doing something helpful!

Image

Next week should see a lot of "visible" progress, as opposed to invisible progress we've been making. It will also see the arrival of the sails on Wednesday and Thursday - which I'm really looking forward to!! The booms and lower 6' of the spars have been painted and the fitting remounted, read to have nu-suls bent to them. We'll get to go sailing on Thursday!!! 

Saturday, September 6, 2014

The Sails Are Nearly Done!!

I have had some business things to attend to. As a result, I've been in Santa Cruz dealing with this rather than down on MAYAN getting "work" done; which is mostly getting in Wayne's way asking inane questions. But, one piece of the project is proceeding apace just a couple of blocks from home - sail making. Yesterday my granddaughter and I walked over to check out the progress on the sails.

The white sails are all completed and waiting in bags for the big "haul" to LA.  We've taken a little different approach, non-traditional, on the main staysail and the fore staysail. They are loose footed so that we can ease the outhaul and round the sails when appropriate. The mainsail is still running on a track with cars along the boom, as it doesn't need to have the draft altered as much. But the poor staysails are either operating solitarily or are flying in the slot between the advance staysail or the yankee/genoa. As a result, I've always wanted to be able to get more shape in them when they're on their own. We'll see how well all this theory actually applies, and can always put the cars on them again if we need to.

We're keeping the original multi-colored spinnaker - which appears to have been cut down from a much bigger boat so there's no chance we'll ever blow that thing out. We are also lifting the over-size A-2 from S'AGAPO (It's not legal under PHRF, IRC or ORR) and we will just have to live with the british numbers. This A-2 is perfect for MAYAN. When flying it has an effective overlap of about 140%, a great reacher.

Finally, the gollywobbler is finally done. It's got a dyneema luff rope and triple cloth luff tape, so we can reach up more with it. But I really didn't have any idea how BIG it really is until seeing it laid out on the floor at the loft. It literally doesn't fit. Pretty funny! It is coming out exactly the way our granddaughter and Stacey wanted it.

Here's our granddaughter doing her first inspection, and you can see Patrick (a top sailmaker at Santa Cruz Sails {Now Ullman Sails}) laying out the MAYAN logo on the center section of the sail.

Image


Most of the stencil for the MAYAN logo is glued down now. It's computer cut with the same cutter they use on the sail cloth. Double layers of butcher paper and a bit of spray adhesive hold it in place. There is a pattern under the sail to show Patrick where to put the stencil, which was generated by replacing the cutter with a sharpie. 

Image


Next Patrick gets the box ink (used for putting black logos and stuff on cardboard boxes) and starts to "paint" the logo on with a foam roller. This goes fast and the black ink is amazingly potent. It covers in two passes easily, drying quickly. The solvent is denatured alcohol, so it smelled a little like a doctor's office. "Icky" said our granddaughter as she sniffed it.

Image



After two coats, Patrick is hunting for "thin spots" with more ink.  My wonderful granddaughter was lying down in a Syndey 38 spinnaker by this point having a little nap. Clearly a ocean going sailor in the making.

Image


Finally, we pulled all the masking off and revealed what our granddaughter calls the "Monster Face". Stacey and I are thrilled with the contrast between the yellow/gold cloth strip across the center of the gollywobbler and the black ink. No one will doubt which boat this is! We will be putting a 6' high version of this on the mainsail also, and have selected "1947" as our sail number (the year she was built).

Image


We've had hats, shirts, and vests made with this MAYAN logo and the entire package is coming out wonderfully well.

Now, back to work!

Beau

Tuesday, August 5, 2014

The Wood Is Here!!

With the exterior varnish nearly finished we've moved our focus back to the interior.  Next on the list is building the new head.

To match MAYAN's beautiful original Honduras mahogany Wayne had to hunt for quite a while. The wood's here!  I'll help stack and sort it, and we'll get started on making the bulkheads, panels and doors for the new head. After weeks of work which doesn't really show progress - re-wiring, re-plumbing, engine work and bilge painting - it will be a blast to see this beautiful pile of lumber come to life.

Thursday, July 31, 2014

The varnish work on the cabin sides continues, and the outcome is fabulous. Ruben finished the wood work a week ago and José has been hard at work finishing it. Here are a few snaps of what she looks like now. We're really pleased with the way the dark mahogany cabin sides bring out the curve of MAYAN's sheer.

I spend the morning removing all the sails from MAYAN, we have new sails coming in the next few weeks. She looks a little odd with bare booms, but this will give me a chance to re-paint the booms, replace the worn rigging for outhauls and topping lifts, and generally clean things up before the new sails arrive.







Thursday, July 10, 2014

Gluing The Splines In The Locking Scarf



Yesterday we (meaning Ruben) fit and glued the splines into the locking scarfs on either side of the trunk cabin. Having made the gap between the planks straight and of even width, Ruben hand shaped piece of Honduras mahogany to fit. The picture to the right shows the locking scarf prepared for the splines.




In the photo below you can see the work Ruben has put in matching the color and the grain of the wood, so that the resulting repair will disappear after varnishing. We'll come back to this once it's finished, in about a week.


The third picture, on the right, shows Ruben holding up the spine being slathered with gorilla glue just before tapping it into the slot in the side of the cabin. Each piece is press fit and doesn't require clamping.


In the final picture the spines have been inserted and the excess Gorilla glue is pouring out. This is easily cleaned up and we will go after it later today.  The next step is to hunt down all the small imperfections in the cabin sides and fit them with small dutchmen or wood plugs to fill years of damage to the wood.  We should be able to start sanding and the initial refinishing early next week.






Wednesday, July 9, 2014

Gluing The Cabin Side Planks

Glueing in the new panels:

First, after everything is cut to a nice press fit, both sides get covered with glue. The glue in this case is what Wayne calls "Golf Club Glue" for the center of the piece. This is a two part 50:50 glue of some sort, and I have to investigate exactly what it is. Wayne and the guys use it to double plank hulls (Which is their standard approach to fixing sad caravel planked hulls.) and they used it when MAYAN was rebuilt in 2005. It is a stretchy form of glue, that will hold well and dry while also letting the wood move more than West System. 

The outer edge of the piece and the lips covered in West Epoxy that has been thickened with Honduras Mahogany dust, heaps of it. One of my jobs was holding the angle grinder in a trash can with a piece of wood and grinding it into dust. It took me a while to get the hang of grinding a piece of wood with a powerful grinder, one in each hand, without being able to see anything as the top of the trash can is covered with a blanket to contain the dust. You grind until the grinder starts to overhead, which is darned quick, and then stop and clean everything out, capturing the dust.

Here's Ruben putting the port side plank into the cabin side.

Image

Next it is time to clamp the plank down. Pressure needs to be built up in the center first and then towards the outside to allow the glues to migrate towards the edges. We were in luck with MAYAN, she has a large bulwark and it is at exactly the right height. On the port side Rubin had rigged up his normal clamping system, and I helped out with some braces and wedges to the bulward. He liked that so much we did the entire starboard side with just braces and wedges.

Image


In the picture above you can see the clamps, with the forward one reaching through the port hole and the after one reaching over the cockpit combing. The plank that is between the clamps is a piece of beautiful Honduras Mahogany that is an off cut from two covering planks that we were installing. "Don't break that by tightening the clamps too tight! We need that wood for the next pair of dutchmen." said Ruben.

According to Ruben, clamping is a big challenge and often more difficult than getting the bits of wood and the hole for the dutchman exactly right. "If we were installing this repair in a painted surface, we would simply drill holes and hold all this in with wood screws. Then we'd plug them later and no one would ever see it. But, you want this to be varnished, so we can't injure the wood like that." Ruben is from Peru and his syntax is often more flowery than ours. "Injure the wood" I like that.

Once we'd started the glue flowing it's all hands to the clean up. Putty knives for the big ugly bits and lots of shop towels with alcohol for the final clean up. The biggest problem I had was a real knack for getting the glue on the back of my hands, my knees and my arms. Ah well, I used to have the same problem years ago building stuff with epoxy; somethings never change.

Now, it's off to the starboard side to repeat the process.

Image


This plank is smaller so there wasn't a need for a central block in the ultimate clamping. I installed a central post and wedges while the glue moved/migrated and then removed it once we'd moved to what you see above. 

The posts and wedges are all made from scrap that I found laying around the boat yard. I was shocked to find that one of them was teak, old and battered, when I cut into it. Ruben says it came off the rail of a boat built in the 1890s, the wood was still oily and beautiful inside the piece. "You should save this" I suggested. Ruben just laughed and pointed at a stack of wood twice as high as my Mini, "You can put it on the stack with all the other old teak we've saved from boats that have died." It seems that Wayne and the guys save every piece of teak they can and that has allowed them to deck a number of 20 and 30 foot boats with the scraps left over from deck rebuilds. Ruben informed me that the beautiful 30' Danish cutter that is a few boats down the dock was due to be re-decked from the pile. "We like to use the old wood. It's stable and doesn't wander." Rubin continued.

After we've cleaned everything up, Ruben goes around with small wedges and adjusts the pressure to right where he wants it. In the picture above you can see the tiny wedges he has driven under the 2X4. Prior to using a 2X4 for this purpose, Ruben has used the joiner to insure that the surface is completely flat and true - a great use for what used to be the side of a palette that an engine was delivered upon. 

Below you can see a close up of the tiny wedges and the glue continuing to migrate out from behind the plank. The reason for the West with the sanding dust becomes apparent as well. While the Golf Club Glue is great for holding the plank, it is white when it dries. The West Epxoy full of dust will blend in with the varnished Mahogany cabin side and you'll never see the joint. Well not unless you're waking up from too much fun on the side deck. ;)

Image


Next up will be filling the hook-scarf joints further forward on the cabin side. As I write this, Ruben is probably already at work cutting the odd splines that he'll need. Because the hook scarf runs across the grain at various angles, the spline needs to be cut with the correct grain angle to avoid being visible. It'll be interesting to see how he cuts these.

Back to work.

Tuesday, July 8, 2014

Progress on The Cabin Sides Continues

Yesterday afternoon we just about reached the point of starting to do the final fit the boards into the sides of the trunk cabin. The planks below are a nice tight fit, maybe a bit too tight. It's warm and dry here in Los Angeles, so this wood is about as small as it'll ever be. We'll leave a tiny bit more room than we would if we were fitting this up in SF and a lot more than if we were in the PNW. While this will be set in with epoxy, the flexibility of the epoxy will let the wood expand as its moisture content increases. The varnish over the joints will be plenty flexible enough to allow the joints to move a tiny bit.

Here are the planks of Honduras Mahogany which Wayne's team has cut. The wood for this has been hidden in Wayne's tug boat for well over 15 years, "Waiting for a boat that deserves this wood." Real Honduras Mahogany is terribly hard to find today especially in this size. There's more of this wood that he's "saving" for MAYAN's interior rebuild.


Image

Here's the Starboard side cut. The round hole is for a bronze port hole. As you know, we're installing a Hurricane Combi boiler/heater for domestic hot water and heat. The stainless steel exhaust fitting, which is supposed to exit through the transom or hull side, is polished stainless and quite shiny. Wayne had a great idea. We'll put a port hole through the cabin side and mount the exhaust within the hole. When the weather is really awful, we close the glass of the port hole. The port hole is mounted backwards, with the glass on the outside. This is how Alden mounted the port hole into the engine room on three schooner's I've sailed on. Supposedly, it is mounted this way so that one can ventilate the engine room from on-deck, but it is also reputedly so one can open the port hole and squirt a fire extinguisher down the hole in the event of a fire. We'll follow this custom so that one can close the glass when the seas are rough or when washing down the deck so water doesn't get into the exhaust pipe. There will be a small gooseneck in the pipe also, to help keep water out.


Image

This next picture is of the Port side cut. The round hole in this is where the AC power cord receptacle used to be mounted. I've relocated it down into the engine room and notched a hatch board to let the cord go below. I'm thrilled not to be looking at the thing and also thrilled to know that the plug won't be exposed to salt spray any longer.


Image

On each side there are three 6" long bronze lag bolts that hold the aft edge of the cabin side to the corner post. We'll be documenting exactly where these are for future access, and then burying them with the wood piece. After this, we have two or three small dutchmen to put into the after side of the truck cabin, where it faces the cockpit, and then we're ready for the final sanding and finishing work.

Sunday, July 6, 2014

Slowly Uncovering MAYAN's Mysteries


When Wayne Ettel set about restoring MAYAN's hull and deck in 2005, he was forced to replace many of her heavy white oak double sawn frames.  To avoid the rot that had eaten away at the oak, Wayne chose to build the new double sawn frames from Purple Heart, a strong tropical wood with many of the same characteristics of White Oak but without the tendency to rot.  This was one of many subtile changes made to make MAYAN even more resistant to the difficulties faced as these old wooden ladies age gracefully.

During the rebuilding process, the Keel, Horn Timber, Stem, Mast Steps and various other of the heaviest timbers were found to be in perfect conditions after 58 years of service, and are still doing just fine at 67.  Despite his tremendous knowledge of woods, Wayne was unable to determine what kind of wood had been used in Belize all those years ago to fashion these heavy timbers.

Sapodilla Wood
Today I received word from the grandson of MAYAN's builder, Robert Tewes, that the mystery has been solved.  In a conversation with Denys Bradley, Robert learned that like most boats built in Belize MAYAN's heavy timbers were made of Sapodilla wood.  This is a wood that is heavier than water, and thus sinks, is rich in sap and extremely hard to work on with woodworking tools.  All of this explains why the wood remains impervious to water and rot, and also why the paint flakes off it after a time as it is still secreting oil from within it's grain.

Ancient Mayan Sapodilla Door Jam
Sapodilla wood is so strong and durable that the MAYAN people used it to build lintels and beams in their buildings, many of which are with us today after centuries of use.  Today few Sapodilla trees are cut for wood.  Rather the trees are grown for their fruit, a favorite of the local people and the howler monkeys, and the sap is drawn to make organic natural chewing gum.

It will be interesting to see if future owners of MAYAN, a hundred years from now, can discover any degradation in the Sapodilla wood frames and timbers the comprise her backbone.

Friday, July 4, 2014

Building Out The Fo'c's'le - A Cabin For MAYAN's Small Crew

MAYAN's smaller crew is growing - we have one grand child and one more on the way.  Hopefully, these two will be joined by many others in the coming years.  As you know, MAYAN's mission is to take our family cruising with the occasional classic boat race tossed in.  A key piece of this mission is bringing along the next generation of sailors in the proper manner.  That means a proper cabin with the smell of tarred marlin, slightly damp anchor rode, kerosene lanterns, and the chuckle of waves under the forefoot.
Cutter SOL STRAALE - 23' LOD
In Beau's childhood he had the wonderful good fortune to spend many evenings in the small cramped fo'c's'le of the SOL STRAALE, sharing the tiny space with his younger brother, Tom.  It left a life-long impression.   
When we bought her, MAYAN's fo'c's'le was filled with lines, sails, an inflatable dinghy, an outboard, and various shelves and drawers filled with spare parts and tools.  Basically, it was serving as a typical domestic garage ashore in California; holding everything other than a car.  While it's a little handy to have such a space aboard, there wasn't anything stored there that couldn't be stored elsewhere or more efficiently.  
Small Door
Combining the needs of our growing extended family and the desire to sort out this pile of "stuff" in the fo'c's'le, we have re-designed the layout of the space to accommodate our needs.  
When John Alden designed MAYAN, this space was the the home to two paid deck crew.  With a settee below and two pipe berths above, a head far forward between the berths, and two hanging lockers aft. The fo'c's'le was accessed from the passageway aft, which contained the Captain's Cabin and the Galley, through the small door on the right.  The diminutive door is only about 20" wide and 4' 3" high, clearly perfect for our small and growing crew members.  The fo'c's'le was traditionally occupied during the summer sailing season by two young men working the months between college terms or by young sailors working their way up.  We will be returning the fo'c's'le to something much more like what John Alden had originally designed.
Two full sized fixed berths will run aft on either side from the newly built door to the chain locker.  They will meet forward where a cushion at the same level will provide a full width seating area and padded play space for the smaller crew members.  On either side, above the berths, pipe berths will be suspended from the deck beams and hinged at their outboard edge.  While the pipe berths will primarily serve to hold the Gollywobbler, Fisherman, Advance, Yankee and Genoa, those sails can be move on deck and two more crew can take their place.  Just aft of the berths we will be building a hanging locker to starboard, with drawers below, and a cupboard to port with additional drawers below.

Port Forward End of The Fo'c's'le
Demolition of the relatively modern shelves and cupboards in the fo'c's'le has been completed.  With only 4'6" of headroom under the foredeck beams, it will be the perfect private place for all the grandchildren.  The next step will be to strip the ancient paint, some of it appears that it could date back many decades, and refinish the ceiling. For those who aren't sailors, the "ceiling" on a boat is the horizontally planked surface that runs along the inside of the frames (ribs) and provides both a smooth surface to the interior and keeps gear and equipment from falling against the inside of the planking.
The varnished platform shown to the left will be extended to make the berths and the common space between them. We'll add mahogany doors over the chain locker entrance shown and a ladder that folds up to hang from the overhead when not in use. The ladder will be designed to double as a boarding/swim ladder.  Storing the boarding/swim ladder has always driven me nuts, the Wayne made the wonderful suggestion that we could dual-purpose the fo'c's'le ladder.  
Port Aft End of The Fo'c's'le
In the picture to the right, the broad space aft in the fo'c's'le will accommodate the hanging lockers and drawers.  We'll extend the top of the lower section of the drawers to provide a desk space.  

The hanging knee shown is part of the structure to support the foremast rigging.  The bulkhead runs across the boat just forward of the foremast.  Like all the structural wood in MAYAN these knees, the clamp, even the ceiling is substantially stronger than modern boat designs; this is probably why MAYAN is still here, after 67 years and tens of thousands of sea miles.

During the rebuilding process, it has become painfully clear that the wood working is the quickest and easiest of tasks.  It has been the plumbing, electrical and mechanical tasks that have taken the bulk of the time.  Or, as Wayne puts it: "If someone gives you a complete hull, deck and interior, you've only got about a third of a boat."  We're looking forward to building out the fo'c's'le in short order.